Home / Instrumentation, OP Amps, Buffer Amps / MCP622-E/SN/
MCP622-E/SN

MCP622-E/SN

Manufacturer No:

MCP622-E/SN

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 2 CIRCUIT 8SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP622-E/SN Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    5.5 V
  • Voltage - Supply Span (Min)
    2.5 V
  • Current - Output / Channel
    70 mA
  • Current - Supply
    2.5mA (x2 Channels)
  • Voltage - Input Offset
    200 µV
  • Current - Input Bias
    5 pA
  • Gain Bandwidth Product
    20 MHz
  • Slew Rate
    10V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP622-E/SN is a low-power, low-offset voltage operational amplifier integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low Power Consumption: The MCP622-E/SN is designed to operate at low power, making it suitable for battery-powered applications or any scenario where power efficiency is crucial. 2. Low Offset Voltage: It has a low input offset voltage, which ensures accurate and precise amplification of signals. 3. Rail-to-Rail Input and Output: The chip supports rail-to-rail input and output operation, allowing it to handle signals close to the power supply rails without distortion. 4. Wide Supply Voltage Range: It can operate with a wide supply voltage range, typically from 2.7V to 6.0V, making it compatible with various power sources. 5. Small Package Size: The MCP622-E/SN is available in a small package size, making it suitable for space-constrained applications.Application Scenarios: 1. Sensor Amplification: The low offset voltage and rail-to-rail input/output capabilities make the MCP622-E/SN ideal for amplifying signals from various sensors, such as temperature sensors, pressure sensors, or light sensors. 2. Portable Devices: Due to its low power consumption and small package size, the chip can be used in portable devices like smartphones, tablets, or wearable devices, where power efficiency and space-saving are critical. 3. Battery Monitoring: The MCP622-E/SN can be utilized in battery monitoring circuits to accurately measure the battery voltage and provide feedback for charging or discharging processes. 4. Signal Conditioning: It can be employed in signal conditioning circuits to amplify weak signals, remove noise, or adjust signal levels before further processing or transmission. 5. Audio Amplification: The chip can be used in audio amplifiers or headphone amplifiers, providing accurate and high-quality amplification of audio signals.These are just a few examples of the advantages and application scenarios of the MCP622-E/SN integrated circuit chip. Its versatility, low power consumption, and small form factor make it suitable for a wide range of electronic applications.
MCP622-E/SN Relevant information