Home / Instrumentation, OP Amps, Buffer Amps / MCP6V97-E/MS/
MCP6V97-E/MS

MCP6V97-E/MS

Manufacturer No:

MCP6V97-E/MS

Manufacturer:

Microchip Technology

Description:

IC OPAMP ZER-DRIFT 2CIRC 8MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6V97-E/MS Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-MSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    5.5 V
  • Voltage - Supply Span (Min)
    2.4 V
  • Current - Output / Channel
    40 mA
  • Current - Supply
    1.1mA (x2 Channels)
  • Voltage - Input Offset
    25 µV
  • Current - Input Bias
    2 pA
  • Gain Bandwidth Product
    10 MHz
  • Slew Rate
    9.5V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    Zero-Drift
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    Zero-Drift
The MCP6V97-E/MS is a low-power, zero-drift operational amplifier (Op-Amp) integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low-power consumption: The MCP6V97-E/MS is designed to operate at very low power levels, making it suitable for battery-powered applications or any scenario where power efficiency is crucial. 2. Zero-drift architecture: This Op-Amp chip utilizes a zero-drift architecture, which means it provides high precision and stability over time and temperature variations. It minimizes the need for calibration and ensures accurate measurements. 3. Rail-to-rail input and output: The chip supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the power supply rails. This feature is beneficial in applications where the input or output signals can vary across the entire voltage range. 4. Wide supply voltage range: The MCP6V97-E/MS can operate from a wide supply voltage range, typically from 2.7V to 5.5V. This flexibility enables its usage in various power supply configurations. 5. Small form factor: The chip comes in a small MSOP-8 package, which makes it suitable for space-constrained applications or designs where size reduction is essential.Application Scenarios: 1. Sensor signal conditioning: The high precision and low-power characteristics of the MCP6V97-E/MS make it ideal for sensor signal conditioning applications. It can accurately amplify and condition signals from various sensors, such as temperature sensors, pressure sensors, or strain gauges. 2. Portable medical devices: Due to its low-power consumption and small form factor, the chip can be used in portable medical devices like glucose meters, blood pressure monitors, or wearable health trackers. It ensures accurate measurements while maximizing battery life. 3. Industrial automation: The zero-drift architecture of the MCP6V97-E/MS makes it suitable for industrial automation applications that require precise measurements and control. It can be used in data acquisition systems, process control, or instrumentation equipment. 4. Automotive electronics: The chip's wide supply voltage range and robust performance make it applicable in automotive electronics. It can be used in systems like automotive sensors, battery management, or engine control units. 5. Consumer electronics: The MCP6V97-E/MS can find applications in various consumer electronic devices, such as portable audio equipment, handheld instruments, or battery-powered devices that require accurate signal amplification.These are just a few examples of the advantages and application scenarios of the MCP6V97-E/MS integrated circuit chip. Its low-power consumption, zero-drift architecture, and small form factor make it a versatile choice for precision amplification and signal conditioning in various industries.
MCP6V97-E/MS Relevant information