Home / Instrumentation, OP Amps, Buffer Amps / LMC6482IMM/
LMC6482IMM

LMC6482IMM

Manufacturer No:

LMC6482IMM

Manufacturer:

Texas Instruments

Description:

IC CMOS 2 CIRCUIT 8VSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LMC6482IMM Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-VSSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C
  • Voltage - Supply Span (Max)
    15.5 V
  • Voltage - Supply Span (Min)
    3 V
  • Current - Output / Channel
    30 mA
  • Current - Supply
    1.3mA (x2 Channels)
  • Voltage - Input Offset
    110 µV
  • Current - Input Bias
    0.02 pA
  • Gain Bandwidth Product
    1.5 MHz
  • Slew Rate
    1.3V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    CMOS
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Not For New Designs
  • Series
    -
The LMC6482IMM is a dual operational amplifier integrated circuit chip manufactured by Texas Instruments. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low Power Consumption: The LMC6482IMM is designed to operate with low power consumption, making it suitable for battery-powered applications or devices where power efficiency is crucial. 2. Rail-to-Rail Input and Output: This chip supports rail-to-rail input and output voltage ranges, allowing it to operate with signals that span the entire supply voltage range. This feature enhances the chip's versatility and compatibility with different signal levels. 3. Wide Supply Voltage Range: The LMC6482IMM can operate with a wide supply voltage range, typically from 2.7V to 15V. This flexibility makes it suitable for various power supply configurations. 4. High Input Impedance: The chip has a high input impedance, which means it draws minimal current from the input source. This feature is beneficial when interfacing with sensors or other low-power devices. 5. Low Input Offset Voltage: The LMC6482IMM has a low input offset voltage, which minimizes errors in precision applications that require accurate amplification.Application Scenarios: 1. Signal Conditioning: The LMC6482IMM can be used for signal conditioning in various applications, such as sensor interfaces, data acquisition systems, or medical devices. Its low power consumption and rail-to-rail capabilities make it suitable for amplifying and conditioning small signals accurately. 2. Portable Devices: Due to its low power consumption and wide supply voltage range, the LMC6482IMM is well-suited for portable devices like smartphones, tablets, or wearable electronics. It can be used in audio amplification, filtering, or voltage regulation circuits. 3. Battery Management: The chip's low power consumption and rail-to-rail capabilities make it suitable for battery management systems. It can be used in battery chargers, fuel gauges, or power management circuits to monitor and control battery voltage levels efficiently. 4. Industrial Control Systems: The LMC6482IMM can be applied in industrial control systems, such as motor control, process control, or instrumentation. Its high input impedance and low input offset voltage make it suitable for precise measurement and control applications. 5. Audio Amplification: With its rail-to-rail capabilities and low distortion, the LMC6482IMM can be used in audio amplifiers, headphone amplifiers, or audio mixers to provide high-quality audio amplification.These are just a few examples of the advantages and application scenarios of the LMC6482IMM integrated circuit chip. Its versatility, low power consumption, and precision characteristics make it a popular choice in various electronic applications.
LMC6482IMM Relevant information