Home / Instrumentation, OP Amps, Buffer Amps / LMC7101QM5/NOPB/
LMC7101QM5/NOPB

LMC7101QM5/NOPB

Manufacturer No:

LMC7101QM5/NOPB

Manufacturer:

Texas Instruments

Description:

IC OPAMP GP 1 CIRCUIT SOT23-5

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LMC7101QM5/NOPB Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    SOT-23-5
  • Package / Case
    SC-74A, SOT-753
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    15.5 V
  • Voltage - Supply Span (Min)
    2.7 V
  • Current - Output / Channel
    50 mA
  • Current - Supply
    800µA
  • Voltage - Input Offset
    110 µV
  • Current - Input Bias
    1 pA
  • Gain Bandwidth Product
    1.1 MHz
  • Slew Rate
    1.1V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    Automotive, AEC-Q100
The LMC7101QM5/NOPB is a precision operational amplifier integrated circuit chip manufactured by Texas Instruments. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. High Precision: The LMC7101QM5/NOPB provides high precision with low offset voltage and low input bias current, making it suitable for applications that require accurate amplification and signal conditioning.2. Low Power Consumption: This chip operates at low power, making it suitable for battery-powered devices or applications where power efficiency is crucial.3. Wide Supply Voltage Range: The LMC7101QM5/NOPB can operate with a wide supply voltage range, typically from 2.7V to 15V, allowing flexibility in different power supply configurations.4. Rail-to-Rail Input and Output: It supports rail-to-rail input and output operation, enabling it to handle signals close to the power supply rails, maximizing the dynamic range and signal fidelity.5. Small Package Size: The chip is available in a small SOT-23 package, making it suitable for space-constrained applications or designs where miniaturization is essential.Application Scenarios: 1. Sensor Signal Conditioning: The LMC7101QM5/NOPB can be used to amplify and condition signals from various sensors such as temperature sensors, pressure sensors, or strain gauges. Its precision and low offset voltage help maintain accuracy in the signal conditioning process.2. Portable and Battery-Powered Devices: Due to its low power consumption, the chip is suitable for applications like portable medical devices, handheld instruments, or battery-powered sensors, where power efficiency is critical.3. Audio Amplification: The LMC7101QM5/NOPB can be used in audio amplification circuits, such as headphone amplifiers or audio preamplifiers, where accurate and low-distortion amplification is required.4. Industrial Control Systems: The chip's precision and wide supply voltage range make it suitable for industrial control systems, such as process control, motor control, or instrumentation, where accurate and reliable signal amplification is necessary.5. Automotive Electronics: The LMC7101QM5/NOPB can be used in automotive electronics applications, such as engine control units, sensor interfaces, or battery management systems, where precision, low power consumption, and small package size are advantageous.It's important to note that the specific application scenarios may vary depending on the requirements and specifications of the overall system design.
LMC7101QM5/NOPB Relevant information