Home / Instrumentation, OP Amps, Buffer Amps / NJM072CG-TE2/
NJM072CG-TE2

NJM072CG-TE2

Manufacturer No:

NJM072CG-TE2

Description:

IC OPAMP JFET 2 CIRCUIT 8SOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

NJM072CG-TE2 Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOP
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 105°C
  • Voltage - Supply Span (Max)
    36 V
  • Voltage - Supply Span (Min)
    8 V
  • Current - Supply
    1.4mA
  • Voltage - Input Offset
    3 mV
  • Current - Input Bias
    30 pA
  • Gain Bandwidth Product
    3 MHz
  • Slew Rate
    13V/µs
  • Output Type
    -
  • Number of Circuits
    2
  • Amplifier Type
    J-FET
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The NJM072CG-TE2 is a dual operational amplifier integrated circuit chip manufactured by New Japan Radio Co., Ltd. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the NJM072CG-TE2 are:Advantages: 1. Low Noise: The NJM072CG-TE2 has a low noise characteristic, making it suitable for applications where signal integrity is crucial, such as audio amplification and measurement circuits. 2. Low Input Bias Current: The chip has a low input bias current, which reduces the impact of input current on the circuit's performance. This feature is beneficial in applications where high input impedance is required, like sensor interfaces and transimpedance amplifiers. 3. Wide Supply Voltage Range: The NJM072CG-TE2 operates over a wide supply voltage range, typically from ±2V to ±18V. This flexibility allows it to be used in various power supply configurations and applications. 4. Rail-to-Rail Output: The chip provides rail-to-rail output swing, enabling it to drive signals close to the power supply rails. This feature is advantageous in applications where the full dynamic range of the power supply needs to be utilized.Application Scenarios: 1. Audio Amplification: The low noise and wide supply voltage range of the NJM072CG-TE2 make it suitable for audio amplification applications, such as headphone amplifiers, audio mixers, and preamplifiers. 2. Sensor Interfaces: The low input bias current and wide supply voltage range make the chip suitable for sensor interface circuits, where accurate measurement of small signals is required. It can be used in applications like temperature sensors, pressure sensors, and strain gauges. 3. Active Filters: The NJM072CG-TE2 can be used in active filter circuits, such as low-pass, high-pass, and band-pass filters. Its low noise and rail-to-rail output capabilities are advantageous in these applications. 4. Instrumentation Amplifiers: The chip's low noise, low input bias current, and wide supply voltage range make it suitable for instrumentation amplifier circuits used in precision measurement applications, such as data acquisition systems and medical equipment.It is important to note that the specific application and performance requirements may vary, and it is recommended to refer to the datasheet and consult with the manufacturer for detailed information and suitability for a particular application.
NJM072CG-TE2 Relevant information