Home / Instrumentation, OP Amps, Buffer Amps / MCP6H01T-E/SN/
MCP6H01T-E/SN

MCP6H01T-E/SN

Manufacturer No:

MCP6H01T-E/SN

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 1 CIRCUIT 8SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6H01T-E/SN Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    16 V
  • Voltage - Supply Span (Min)
    3.5 V
  • Current - Supply
    135µA
  • Voltage - Input Offset
    700 µV
  • Current - Input Bias
    10 pA
  • Gain Bandwidth Product
    1.2 MHz
  • Slew Rate
    0.8V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP6H01T-E/SN is a high-side current sense amplifier integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. High Accuracy: The MCP6H01T-E/SN provides high accuracy current sensing with a maximum offset voltage of 500 μV and a maximum gain error of 0.5%. 2. Wide Input Voltage Range: It can operate with input voltages ranging from 2.7V to 5.5V, making it suitable for a wide range of applications. 3. Low Quiescent Current: The chip has a low quiescent current of 60 μA, which helps in reducing power consumption. 4. Small Package Size: The MCP6H01T-E/SN is available in a small 8-pin SOIC package, making it suitable for space-constrained applications.Application Scenarios: 1. Battery Management: The MCP6H01T-E/SN can be used in battery management systems to monitor the charging and discharging currents accurately. It helps in determining the battery's state of charge and enables efficient power management. 2. Power Supplies: It can be used in power supply circuits to monitor the current flowing through the load. This information can be used for overcurrent protection, load balancing, and power optimization. 3. Motor Control: The chip can be used in motor control applications to monitor the current flowing through the motor windings. It helps in detecting faults, such as overcurrent conditions, and enables precise control of motor speed and torque. 4. LED Lighting: The MCP6H01T-E/SN can be used in LED lighting applications to monitor the current flowing through the LEDs. It helps in maintaining consistent brightness levels, detecting faulty LEDs, and implementing dimming functionality. 5. Industrial Automation: It can be used in various industrial automation applications, such as robotics and process control, to monitor current in different stages of the system. This enables precise control, fault detection, and system optimization.Overall, the MCP6H01T-E/SN integrated circuit chip offers high accuracy current sensing, low power consumption, and small package size, making it suitable for a wide range of applications where accurate current monitoring is required.
MCP6H01T-E/SN Relevant information