Home / Instrumentation, OP Amps, Buffer Amps / MCP601T-I/SN/
MCP601T-I/SN

MCP601T-I/SN

Manufacturer No:

MCP601T-I/SN

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 1 CIRCUIT 8SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP601T-I/SN Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    2.7 V
  • Current - Output / Channel
    22 mA
  • Current - Supply
    230µA
  • Voltage - Input Offset
    700 µV
  • Current - Input Bias
    1 pA
  • Gain Bandwidth Product
    2.8 MHz
  • Slew Rate
    2.3V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP601T-I/SN is an integrated circuit chip, specifically an operational amplifier (op-amp), produced by Microchip Technology Inc. It is a single-channel, low-power, rail-to-rail input/output op-amp. Some advantages and application scenarios of the MCP601T-I/SN are as follows:Advantages: 1. Low power consumption: The MCP601T-I/SN has a low supply current of 230 μA, making it suitable for battery-powered applications or devices with limited power requirements. 2. Rail-to-rail input/output: The op-amp offers rail-to-rail input and output voltage swings, enabling it to operate near the supply voltage limits, resulting in increased dynamic range and signal fidelity. 3. Wide bandwidth: It has a wide bandwidth of 2.8 MHz, making it suitable for applications that require high-speed operation. 4. Wide temperature range: The MCP601T-I/SN operates over a wide temperature range of -40°C to +125°C, allowing it to be used in various environments. 5. Low input bias currents: With low input bias currents, the op-amp reduces any potential signal distortion or offset caused by input impedance mismatch.Application Scenarios: 1. Battery-powered devices: The low power consumption and wide supply voltage range make the MCP601T-I/SN suitable for portable electronics, such as sensors, portable meters, medical devices, and wearable devices. 2. Signal conditioning: The op-amp can be used for signal conditioning and amplification in various applications, including industrial process control, instrumentation, and sensor interfacing. 3. Audio amplification: Due to its rail-to-rail input/output capability and wide bandwidth, the MCP601T-I/SN finds application in audio amplifiers and line drivers. 4. Active filters: The op-amp can be used in active filter circuits, such as low-pass, high-pass, bandpass, and notch filters, for signal processing or frequency selection purposes. 5. Precision measurement: The low input bias currents and wide operating temperature range make the MCP601T-I/SN suitable for precision measurements in areas such as data acquisition systems, strain gauges, and thermocouples.It is important to note that the MCP601T-I/SN's advantages and application scenarios mentioned above are not exhaustive, and there may be other specific use cases based on the requirements of the system or project.
MCP601T-I/SN Relevant information