Home / Instrumentation, OP Amps, Buffer Amps / MCP6022-E/ST/
MCP6022-E/ST

MCP6022-E/ST

Manufacturer No:

MCP6022-E/ST

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 2 CIRCUIT 8TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6022-E/ST Specifications

  • Type
    Parameter
  • Gain Bandwidth Product
    10 MHz
  • Supplier Device Package
    8-TSSOP
  • Package / Case
    8-TSSOP (0.173", 4.40mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    5.5 V
  • Voltage - Supply Span (Min)
    2.5 V
  • Current - Output / Channel
    30 mA
  • Current - Supply
    1mA (x2 Channels)
  • Voltage - Input Offset
    250 µV
  • Current - Input Bias
    1 pA
  • -3db Bandwidth
    -
  • Slew Rate
    7V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP6022-E/ST is a dual operational amplifier (op-amp) integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be used in various application scenarios. Here are some of its advantages and common application scenarios:Advantages: 1. Low Power Consumption: The MCP6022-E/ST has a low supply current of 230 μA per amplifier, making it suitable for battery-powered applications or any scenario where power efficiency is crucial.2. Rail-to-Rail Input and Output: This op-amp chip supports rail-to-rail input and output operation, allowing it to handle signals close to the power supply rails. This feature is beneficial in applications where the input or output voltage range is near the supply voltage limits.3. Wide Supply Voltage Range: The MCP6022-E/ST operates over a wide supply voltage range of 2.7V to 6.0V, making it compatible with various power supply configurations.4. High Gain Bandwidth Product: With a gain bandwidth product of 10 MHz, this op-amp chip can handle high-frequency signals accurately, making it suitable for audio amplification, signal conditioning, and other applications requiring wide bandwidth.5. Low Input Offset Voltage and Bias Current: The MCP6022-E/ST exhibits low input offset voltage and bias current, ensuring accurate and precise signal amplification.Application Scenarios: 1. Sensor Signal Conditioning: The MCP6022-E/ST can be used to amplify and condition signals from various sensors such as temperature sensors, pressure sensors, and light sensors. Its low power consumption and rail-to-rail operation make it suitable for battery-powered sensor applications.2. Audio Amplification: Due to its wide bandwidth and low distortion characteristics, the MCP6022-E/ST can be used in audio amplification circuits, such as headphone amplifiers, audio mixers, and preamplifiers.3. Active Filters: The op-amp's high gain bandwidth product and low input offset voltage make it suitable for active filter designs. It can be used in applications like low-pass filters, high-pass filters, and band-pass filters.4. Instrumentation Amplifiers: The MCP6022-E/ST can be used to build instrumentation amplifiers, which are commonly used in measurement and data acquisition systems. Its low input offset voltage and bias current ensure accurate amplification of small differential signals.5. Portable and Battery-Powered Devices: The low power consumption and wide supply voltage range of the MCP6022-E/ST make it suitable for portable and battery-powered devices such as handheld instruments, portable audio devices, and medical devices.It's important to note that the specific application scenarios may vary depending on the requirements and specifications of the project.
MCP6022-E/ST Relevant information