LTC2055HVCMS8#TRPBF
Manufacturer No:
LTC2055HVCMS8#TRPBF
Manufacturer:
Description:
IC OPAMP ZERO-DRIFT 2 CIRC 8MSOP
Datasheet:
Delivery:
Payment:
In Stock : 4859
Please send RFQ , we will respond immediately.
LTC2055HVCMS8#TRPBF Specifications
-
TypeParameter
-
Supplier Device Package8-MSOP
-
Package / Case8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
-
Mounting TypeSurface Mount
-
Operating Temperature0°C ~ 70°C (TA)
-
Voltage - Supply Span (Max)11 V
-
Voltage - Supply Span (Min)2.7 V
-
Current - Supply150µA (x2 Channels)
-
Voltage - Input Offset0.5 µV
-
Current - Input Bias3 pA
-
-3db Bandwidth-
-
Gain Bandwidth Product500 kHz
-
Slew Rate0.5V/µs
-
Output TypeRail-to-Rail
-
Number of Circuits2
-
Amplifier TypeZero-Drift
-
PackagingCut Tape (CT)
-
PackagingTape & Reel (TR)
-
Product StatusActive
-
Series-
The LTC2055HVCMS8#TRPBF is a specific model of integrated circuit chip manufactured by Linear Technology (now part of Analog Devices). It is a high voltage, low noise, zero-drift operational amplifier. Here are some advantages and application scenarios of this chip:Advantages: 1. High Voltage Operation: The LTC2055HVCMS8#TRPBF is designed to operate at high voltages, up to ±17V. This makes it suitable for applications that require high voltage amplification or signal conditioning. 2. Low Noise: The chip has very low noise characteristics, which makes it suitable for applications that require high precision and low distortion. 3. Zero-Drift: The LTC2055HVCMS8#TRPBF has zero-drift architecture, which means it provides stable and accurate performance over time and temperature variations. 4. Low Input Bias Current: The chip has low input bias current, which minimizes the impact of input current on the accuracy of the circuit. 5. Rail-to-Rail Output: The chip has rail-to-rail output swing capability, allowing it to drive signals close to the power supply rails.Application Scenarios: 1. Precision Instrumentation: The LTC2055HVCMS8#TRPBF is suitable for precision instrumentation applications that require high accuracy and low noise, such as data acquisition systems, medical equipment, and test and measurement instruments. 2. Sensor Signal Conditioning: The chip can be used for amplifying and conditioning signals from various sensors, such as pressure sensors, temperature sensors, and strain gauges. 3. Industrial Control Systems: The chip can be used in industrial control systems that require high voltage operation and low noise, such as motor control, process control, and power monitoring. 4. Audio Amplification: The low noise and high voltage capabilities of the chip make it suitable for audio amplification applications, such as audio preamplifiers and headphone amplifiers. 5. Automotive Electronics: The chip can be used in automotive electronics applications that require high voltage operation and low noise, such as engine control units, battery management systems, and audio systems.These are just a few examples of the advantages and application scenarios of the LTC2055HVCMS8#TRPBF integrated circuit chip. The specific use cases may vary depending on the requirements of the application and the system design.
LTC2055HVCMS8#TRPBF Relevant information
-
AD8034ARZ-REEL7
Analog Devices Inc. -
CA3140AMZ
Renesas Electronics America Inc -
OP07CPZ
Analog Devices Inc. -
LT1636CMS8#TRPBF
Analog Devices Inc. -
LT1490ACS8#TRPBF
Analog Devices Inc. -
LTC2055HMS8#TRPBF
Analog Devices Inc. -
AD8227BRMZ-R7
Analog Devices Inc. -
AD8227BRZ-R7
Analog Devices Inc. -
AD623ARZ-R7
Analog Devices Inc. -
AD623ARMZ-REEL7
Analog Devices Inc.