Home / Real Time Clocks / DS1251W-120IND+/
DS1251W-120IND+

DS1251W-120IND+

Manufacturer No:

DS1251W-120IND+

Description:

IC RTC PHANTOM CHIP PAR 32EDIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

DS1251W-120IND+ Specifications

  • Type
    Parameter
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 85°C
  • Voltage - Supply
    2.97V ~ 3.63V
  • Interface
    Parallel
  • Date Format
    YY-MM-DD-dd
  • Time Format
    HH:MM:SS:hh (12/24 hr)
  • Type
    Phantom Time Chip
  • DigiKey Programmable
    Not Verified
  • Product Status
    Active
  • Packaging
    Tube
  • Series
    -
The DS1251W-120IND+ is a specific model of integrated circuit (IC) chip manufactured by Maxim Integrated. It is a nonvolatile static RAM (NVSRAM) chip with a capacity of 1 megabit (128k x 8). Here are some advantages and application scenarios of the DS1251W-120IND+ IC chip:Advantages: 1. Nonvolatile Memory: The DS1251W-120IND+ combines the benefits of both RAM and nonvolatile memory. It retains data even when power is lost, similar to a flash memory, but offers faster read and write access like a traditional RAM.2. High-Speed Performance: This IC chip provides fast access times, allowing for quick read and write operations. It is designed to operate at high speeds, making it suitable for applications that require rapid data transfer.3. Low Power Consumption: The DS1251W-120IND+ is designed to be power-efficient, consuming low power during both active and standby modes. This makes it suitable for battery-powered devices or applications where power consumption is a concern.4. Extended Temperature Range: This IC chip is designed to operate reliably across a wide temperature range, typically from -40°C to +85°C. It can withstand harsh environmental conditions, making it suitable for industrial or automotive applications.Application Scenarios: 1. Industrial Automation: The DS1251W-120IND+ can be used in industrial automation systems where nonvolatile memory is required to store critical data, such as configuration settings, calibration data, or event logs. Its high-speed performance and extended temperature range make it suitable for such applications.2. Automotive Electronics: In automotive applications, the DS1251W-120IND+ can be used to store data that needs to be retained even when the vehicle is powered off. This can include parameters for engine control units (ECUs), sensor data, or diagnostic logs. Its low power consumption and extended temperature range make it suitable for automotive environments.3. Data Logging: The fast access times and nonvolatile nature of the DS1251W-120IND+ make it suitable for data logging applications. It can be used to store sensor data, event timestamps, or other logged information in scenarios such as environmental monitoring, scientific research, or security systems.4. Embedded Systems: The DS1251W-120IND+ can be integrated into various embedded systems where nonvolatile memory is required. It can be used for firmware storage, configuration data, or as a scratchpad memory for temporary storage. Its high-speed performance and low power consumption make it suitable for such applications.It's important to note that the specific advantages and application scenarios may vary depending on the requirements and design considerations of the overall system in which the DS1251W-120IND+ IC chip is used.
DS1251W-120IND+ Relevant information