Home / Microcontrollers / ATSAMS70Q21B-CNT/
ATSAMS70Q21B-CNT

ATSAMS70Q21B-CNT

Manufacturer No:

ATSAMS70Q21B-CNT

Manufacturer:

Microchip Technology

Description:

IC MCU 32BIT 2MB FLASH 144LFBGA

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

ATSAMS70Q21B-CNT Specifications

  • Type
    Parameter
  • Supplier Device Package
    144-LFBGA (10x10)
  • Package / Case
    144-LFBGA
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 105°C (TA)
  • Oscillator Type
    Internal
  • Data Converters
    A/D 24x12b; D/A 2x12b
  • Voltage - Supply (Vcc/Vdd)
    1.08V ~ 3.6V
  • RAM Size
    384K x 8
  • EEPROM Size
    -
  • Program Memory Type
    FLASH
  • Program Memory Size
    2MB (2M x 8)
  • Number of I/O
    114
  • Peripherals
    Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
  • Connectivity
    EBI/EMI, I²C, IrDA, LINbus, MMC/SD/SDIO, QSPI, SPI, UART/USART, USB
  • Speed
    300MHz
  • Core Size
    32-Bit Single-Core
  • Core Processor
    ARM® Cortex®-M7
  • DigiKey Programmable
    Not Verified
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    SAM S70
The ATSAMS70Q21B-CNT is a microcontroller chip from Microchip Technology's SAM S70 series. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. High Performance: The ATSAMS70Q21B-CNT is based on a 32-bit ARM Cortex-M7 core, which provides high processing power and performance for demanding applications. 2. Large Memory: It has a large on-chip memory, including up to 2MB of Flash memory and 384KB of SRAM, allowing for complex applications and data storage. 3. Connectivity: The chip supports various communication interfaces like Ethernet, USB, CAN, and UART, enabling connectivity with other devices and networks. 4. Security Features: It includes advanced security features like secure boot, secure firmware update, and cryptographic acceleration, ensuring data integrity and protection against unauthorized access. 5. Rich Peripherals: The ATSAMS70Q21B-CNT offers a wide range of peripherals, including ADCs, DACs, timers, PWM channels, and GPIOs, providing flexibility for different application requirements. 6. Low Power Consumption: It incorporates power-saving features like sleep modes, peripheral power gating, and event system, optimizing power consumption for battery-powered applications.Application Scenarios: 1. Industrial Automation: The high performance and connectivity options make it suitable for industrial automation applications like PLCs (Programmable Logic Controllers), motor control systems, and industrial communication gateways. 2. Internet of Things (IoT): With its connectivity features, security capabilities, and low power consumption, the chip can be used in IoT devices such as smart home automation systems, environmental monitoring devices, and asset tracking solutions. 3. Medical Devices: The ATSAMS70Q21B-CNT's processing power, memory, and security features make it suitable for medical devices like patient monitoring systems, medical imaging equipment, and portable diagnostic devices. 4. Automotive: It can be used in automotive applications such as infotainment systems, advanced driver-assistance systems (ADAS), and vehicle networking modules, leveraging its performance, connectivity, and security features. 5. Consumer Electronics: The chip's capabilities make it applicable in consumer electronics products like high-end audio systems, gaming consoles, and multimedia devices.These are just a few examples, and the ATSAMS70Q21B-CNT can be utilized in various other domains where high performance, connectivity, security, and low power consumption are required.
ATSAMS70Q21B-CNT Relevant information