Home / Microcontrollers / STM32F303C8T6/
STM32F303C8T6

STM32F303C8T6

Manufacturer No:

STM32F303C8T6

Manufacturer:

STMicroelectronics

Description:

IC MCU 32BIT 64KB FLASH 48LQFP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

STM32F303C8T6 Specifications

  • Type
    Parameter
  • Supplier Device Package
    48-LQFP (7x7)
  • Package / Case
    48-LQFP
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Oscillator Type
    Internal
  • Data Converters
    A/D 11x12b; D/A 1x12b
  • Voltage - Supply (Vcc/Vdd)
    2V ~ 3.6V
  • RAM Size
    16K x 8
  • EEPROM Size
    -
  • Program Memory Type
    FLASH
  • Program Memory Size
    64KB (64K x 8)
  • Number of I/O
    37
  • Peripherals
    DMA, I²S, POR, PWM, WDT
  • Connectivity
    CANbus, I²C, IrDA, LINbus, SPI, UART/USART
  • Speed
    72MHz
  • Core Size
    32-Bit Single-Core
  • Core Processor
    ARM® Cortex®-M4
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tray
  • Product Status
    Active
  • Series
    STM32F3
The STM32F303C8T6 is a microcontroller chip from the STM32F3 series, which is based on the ARM Cortex-M4 core. It offers several advantages and can be applied in various scenarios:1. Performance: The STM32F303C8T6 operates at a maximum frequency of 72 MHz and has a floating-point unit (FPU), which enables efficient mathematical calculations. This makes it suitable for applications that require high-performance processing.2. Rich Peripherals: The chip provides a wide range of peripherals, including timers, UART, SPI, I2C, ADC, DAC, and more. These peripherals enable the chip to interface with various external devices and sensors, making it suitable for applications that require extensive connectivity.3. Digital Signal Processing (DSP): The STM32F303C8T6 includes a DSP instruction set, which allows it to efficiently process digital signals. This makes it suitable for applications that involve audio processing, motor control, digital filters, and other DSP-intensive tasks.4. Low Power Consumption: The chip offers multiple low-power modes, allowing it to operate in power-constrained scenarios. This makes it suitable for battery-powered applications or devices that require energy efficiency.5. Real-Time Applications: The STM32F303C8T6 supports real-time operating systems (RTOS) and has a built-in nested vector interrupt controller (NVIC). This makes it suitable for real-time applications that require precise timing and responsiveness.Application scenarios for the STM32F303C8T6 include:1. Industrial Automation: The chip can be used in industrial control systems, motor control applications, and robotics, where high-performance processing, connectivity, and real-time capabilities are required.2. Internet of Things (IoT): With its extensive connectivity options, low power consumption, and processing capabilities, the chip can be used in IoT devices such as smart home systems, environmental monitoring, and asset tracking.3. Audio Processing: The DSP capabilities of the STM32F303C8T6 make it suitable for audio processing applications, including audio effects, audio synthesis, and digital audio workstations.4. Sensor Applications: The chip's rich peripheral set allows it to interface with various sensors, making it suitable for applications such as environmental monitoring, motion detection, and health monitoring.5. Consumer Electronics: The STM32F303C8T6 can be used in consumer electronics devices such as gaming consoles, remote controls, and wearable devices, where a balance of performance, connectivity, and power efficiency is required.Overall, the STM32F303C8T6 offers a combination of performance, connectivity, low power consumption, and real-time capabilities, making it suitable for a wide range of applications in different industries.
STM32F303C8T6 Relevant information