Home / Microcontrollers / STM32F101C8T6/
STM32F101C8T6

STM32F101C8T6

Manufacturer No:

STM32F101C8T6

Manufacturer:

STMicroelectronics

Description:

IC MCU 32BIT 64KB FLASH 48LQFP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

STM32F101C8T6 Specifications

  • Type
    Parameter
  • Supplier Device Package
    48-LQFP (7x7)
  • Package / Case
    48-LQFP
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Oscillator Type
    Internal
  • Data Converters
    A/D 10x12b
  • Voltage - Supply (Vcc/Vdd)
    2V ~ 3.6V
  • RAM Size
    10K x 8
  • EEPROM Size
    -
  • Program Memory Type
    FLASH
  • Program Memory Size
    64KB (64K x 8)
  • Number of I/O
    37
  • Peripherals
    DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT
  • Connectivity
    I²C, IrDA, LINbus, SPI, UART/USART
  • Speed
    36MHz
  • Core Size
    32-Bit Single-Core
  • Core Processor
    ARM® Cortex®-M3
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tray
  • Product Status
    Active
  • Series
    STM32F1
The STM32F101C8T6 is an integrated circuit (IC) chip based on the ARM Cortex-M3 processor core, developed by STMicroelectronics. It has several advantages and can be applied in various scenarios. Here are some of them:1. Performance and Efficiency: The STM32F101C8T6 is based on the ARM Cortex-M3 core, which offers a good balance between performance and power efficiency. It has a maximum operating frequency of 72 MHz, allowing for faster processing of tasks while consuming less power.2. Flexible Memory Options: This IC chip provides various memory options, including up to 64 KB of Flash memory and 20 KB of SRAM. It allows users to implement complex algorithms and store large amounts of data.3. Rich Peripherals: The STM32F101C8T6 offers a wide range of peripherals, such as multiple UART, SPI, and I2C interfaces, which make it suitable for communication applications. It also has timers, ADCs, and DACs, enabling precise timing and analog measurement tasks.4. Low Power Consumption: The features and architecture of this chip are designed to provide efficient power consumption. It has several low-power modes, allowing for optimized battery life in applications where power efficiency is critical.5. Development Ecosystem: STMicroelectronics provides a comprehensive development ecosystem for the STM32F101C8T6. This includes development boards, software development tools, and libraries, making it easier for developers to start their projects.Application scenarios for STM32F101C8T6 IC chips include:1. IoT Devices: The efficient power consumption, wide range of communication interfaces, and adequate memory make the STM32F101C8T6 suitable for IoT devices. It can be used in home automation, smart metering, or remote sensing applications.2. Consumer Electronics: This IC chip can be utilized in various consumer electronics devices, such as wearable devices, gaming consoles, and audio systems. Its performance and power efficiency contribute to a better user experience.3. Industrial Automation: The STM32F101C8T6 can be applied in industrial automation systems, including control systems, PLCs (Programmable Logic Controllers), and robotics. Its rich peripherals and processing capabilities enable efficient control and monitoring.4. Medical Devices: The low power consumption, precise timing capabilities, and sufficient memory make the STM32F101C8T6 suitable for medical devices. It can be used in patient monitoring systems, portable medical instruments, or diagnostic tools.5. Automotive: This IC chip can be utilized in automotive applications for various functionalities like infotainment systems, engine management systems, and advanced driver assistance systems (ADAS). Its performance and robustness make it suitable for automotive environments.It's important to note that these are just a few examples, and the STM32F101C8T6 can be used in a wide range of other applications as well, depending on the specific requirements and needs of the project.
STM32F101C8T6 Relevant information