Home / CPLDs (Complex Programmable Logic Devices) / EPM1270F256C5NAB/
EPM1270F256C5NAB

EPM1270F256C5NAB

Manufacturer No:

EPM1270F256C5NAB

Manufacturer:

Intel

Description:

IC CPLD 980MC 10NS 256FBGA

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

EPM1270F256C5NAB Specifications

  • Type
    Parameter
  • Supplier Device Package
    256-FBGA (17x17)
  • Package / Case
    256-BGA
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 85°C (TJ)
  • Number of I/O
    212
  • Number of Macrocells
    980
  • Number of Logic Elements/Blocks
    1270
  • Voltage Supply - Internal
    2.375V ~ 2.625V, 3V ~ 3.6V
  • Delay Time tpd(1) Max
    10 ns
  • Programmable Type
    In System Programmable
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tray
  • Product Status
    Active
  • Series
    MAX® II
The EPM1270F256C5NAB is an integrated circuit chip from the MAX II family of programmable logic devices (PLDs) manufactured by Intel (formerly Altera). Here are some advantages and application scenarios of this chip:Advantages: 1. Programmability: The EPM1270F256C5NAB is a programmable logic device, which means it can be configured to perform various digital logic functions. This flexibility allows designers to implement custom logic circuits without the need for custom hardware.2. High-density and high-performance: With 256 macrocells and 70,208 logic elements, this chip offers a high-density programmable logic solution. It also provides high-performance features like fast propagation delays and high-speed I/O interfaces.3. Low power consumption: The MAX II family of chips is known for its low power consumption, making it suitable for battery-powered or power-sensitive applications.4. Non-volatile configuration memory: The EPM1270F256C5NAB has non-volatile configuration memory, which means that the programmed logic configuration is retained even when power is removed. This eliminates the need for reprogramming the chip every time it powers up.Application scenarios: 1. Prototyping and development: The EPM1270F256C5NAB can be used in prototyping and development stages of electronic systems. Its programmability allows designers to quickly iterate and test different logic configurations before finalizing the hardware design.2. Industrial automation: This chip can be used in industrial automation applications, such as control systems, motor control, and data acquisition. Its high-density and high-performance features make it suitable for implementing complex control algorithms.3. Communications and networking: The EPM1270F256C5NAB can be used in communications and networking equipment, such as routers, switches, and network interface cards. Its programmability allows for customization and adaptation to different communication protocols and standards.4. Consumer electronics: This chip can be used in various consumer electronics devices, such as gaming consoles, set-top boxes, and audio/video equipment. Its low power consumption and high-performance features make it suitable for power-constrained and multimedia applications.5. Automotive electronics: The EPM1270F256C5NAB can be used in automotive electronics, such as engine control units, infotainment systems, and advanced driver-assistance systems (ADAS). Its high-performance and non-volatile configuration memory make it suitable for safety-critical applications.These are just a few examples of the advantages and application scenarios of the EPM1270F256C5NAB chip. The actual usage depends on the specific requirements and design considerations of the target application.
EPM1270F256C5NAB Relevant information