Home / CPLDs (Complex Programmable Logic Devices) / EPM570GF256C3N/
EPM570GF256C3N

EPM570GF256C3N

Manufacturer No:

EPM570GF256C3N

Manufacturer:

Intel

Description:

IC CPLD 440MC 5.4NS 256FBGA

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

EPM570GF256C3N Specifications

  • Type
    Parameter
  • Supplier Device Package
    256-FBGA (17x17)
  • Package / Case
    256-BGA
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 85°C (TJ)
  • Number of I/O
    160
  • Number of Macrocells
    440
  • Number of Logic Elements/Blocks
    570
  • Voltage Supply - Internal
    1.71V ~ 1.89V
  • Delay Time tpd(1) Max
    5.4 ns
  • Programmable Type
    In System Programmable
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tray
  • Product Status
    Active
  • Series
    MAX® II
The EPM570GF256C3N is an integrated circuit chip from the MAX II family of programmable logic devices (PLDs) manufactured by Intel (formerly Altera). Here are some advantages and application scenarios of this chip:Advantages: 1. Programmability: The EPM570GF256C3N is a programmable logic device, which means it can be configured to perform a wide range of functions. This flexibility allows for customization and adaptation to specific application requirements. 2. High-density and high-performance: With 570,000 logic elements (LEs) and 256 user I/O pins, this chip offers a high level of integration and can handle complex designs. It also provides fast performance with low power consumption. 3. Non-volatile configuration: The chip uses flash memory to store its configuration, which means it retains the programmed design even when power is removed. This eliminates the need for external configuration devices and simplifies system design. 4. Easy design implementation: The EPM570GF256C3N supports various design entry methods, including schematic capture, hardware description languages (HDLs) like VHDL and Verilog, and graphical programming using tools like Quartus Prime. This makes it accessible to both hardware and software engineers.Application Scenarios: 1. Industrial automation: The EPM570GF256C3N can be used in industrial control systems, such as programmable logic controllers (PLCs), to implement complex control algorithms, interface with sensors and actuators, and provide real-time monitoring and control capabilities. 2. Communications and networking: The chip can be utilized in networking equipment, such as routers and switches, to implement custom packet processing, traffic management, and protocol handling functions. It can also be used in communication interfaces like Ethernet, USB, or PCIe. 3. Test and measurement equipment: The EPM570GF256C3N can be employed in test and measurement devices, such as oscilloscopes or data acquisition systems, to implement signal processing, data analysis, and control functions. Its flexibility allows for customization based on specific measurement requirements. 4. Automotive electronics: The chip can be used in automotive applications, such as engine control units (ECUs), to implement complex control algorithms, sensor interfaces, and communication protocols. Its high-performance and reliability make it suitable for demanding automotive environments.These are just a few examples of the advantages and application scenarios of the EPM570GF256C3N integrated circuit chip. Its versatility and programmability make it suitable for a wide range of applications across various industries.
EPM570GF256C3N Relevant information