Home / Telecom / CPC7592BC/
CPC7592BC

CPC7592BC

Manufacturer No:

CPC7592BC

Description:

IC TELECOM INTERFACE 16SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

CPC7592BC Specifications

  • Type
    Parameter
  • Power (Watts)
    10 mW
  • Supplier Device Package
    16-SOIC
  • Package / Case
    16-SOIC (0.295", 7.50mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 110°C
  • Current - Supply
    -
  • Voltage - Supply
    4.5V ~ 5.5V
  • Number of Circuits
    1
  • Interface
    -
  • Function
    Line Card Access Switch
  • Packaging
    Tube
  • Product Status
    Obsolete
  • Series
    -
The CPC7592BC is a specific integrated circuit (IC) chip manufactured by IXYS Integrated Circuits Division. It is a dual-channel, normally open (NO) optically isolated solid-state relay (SSR) chip. Here are some advantages and application scenarios of the CPC7592BC:Advantages: 1. Optically Isolated: The CPC7592BC provides electrical isolation between the input and output channels, ensuring safety and protection against voltage spikes and noise. 2. Solid-State Relays: Being an SSR chip, it offers the advantages of no moving parts, fast switching speeds, high reliability, and long lifespan compared to traditional electromechanical relays. 3. Dual-Channel: The chip has two independent channels, allowing control of two separate loads simultaneously. 4. Normally Open (NO): The output channels of the CPC7592BC are normally open, meaning they are in an off state when the input is not activated. This configuration is suitable for applications where the load needs to be disconnected by default and only connected when the input is triggered. 5. Low Input Current: The chip requires low input current to activate the output channels, making it suitable for low-power control applications.Application Scenarios: 1. Industrial Automation: The CPC7592BC can be used in industrial control systems to switch and control various loads such as motors, solenoids, heaters, and lamps. Its optically isolated design ensures safety and protection in harsh industrial environments. 2. Test and Measurement Equipment: The chip can be utilized in test and measurement instruments where precise and reliable switching of loads is required. Its solid-state nature eliminates the issues of mechanical wear and tear associated with electromechanical relays. 3. Medical Devices: The CPC7592BC can find applications in medical equipment where electrical isolation and fast switching speeds are crucial. It can be used to control various components like pumps, valves, and heating elements. 4. Home Automation: The chip can be integrated into home automation systems to control lighting, appliances, and other electrical loads. Its low input current requirement makes it suitable for low-power control applications. 5. Automotive Electronics: The CPC7592BC can be employed in automotive applications where electrical isolation and reliable switching are necessary. It can be used to control various loads like lights, fans, and motors.It is important to note that the specific application scenarios may vary depending on the system requirements and the overall design. It is recommended to refer to the datasheet and consult with the manufacturer for detailed information and guidance on using the CPC7592BC IC chip.
CPC7592BC Relevant information