Home / Digital Potentiometers / DS4301U-200/T&R/
DS4301U-200/T&R

DS4301U-200/T&R

Manufacturer No:

DS4301U-200/T&R

Description:

IC DGTL POT 200KOHM 32TAP 8UMAX

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

DS4301U-200/T&R Specifications

  • Type
    Parameter
  • Resistance - Wiper (Ohms) (Typ)
    500
  • Operating Temperature
    -40°C ~ 85°C
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Supplier Device Package
    8-uMAX/uSOP
  • Mounting Type
    Surface Mount
  • Temperature Coefficient (Typ)
    ±250ppm/°C
  • Tolerance
    ±20%
  • Features
    -
  • Voltage - Supply
    2.4V ~ 5.5V
  • Memory Type
    Non-Volatile
  • Interface
    Up/Down (U/D, INC, CS)
  • Resistance (Ohms)
    200k
  • Number of Taps
    32
  • Number of Circuits
    1
  • Configuration
    Potentiometer
  • Taper
    Linear
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    -
The DS4301U-200/T&R is an integrated circuit chip manufactured by Maxim Integrated. It is a high-precision, low-power, 12-bit digital-to-analog converter (DAC) chip. Here are some advantages and application scenarios of this chip:Advantages: 1. High Precision: The DS4301U-200/T&R offers a resolution of 12 bits, providing precise control over the analog output voltage. 2. Low Power Consumption: This chip is designed to operate with low power consumption, making it suitable for battery-powered applications or devices with power constraints. 3. Small Form Factor: The DS4301U-200/T&R is available in a small form factor, making it suitable for space-constrained applications or designs where size is a critical factor. 4. Wide Operating Voltage Range: It can operate over a wide voltage range, typically from 2.7V to 5.5V, allowing it to be used in various voltage supply scenarios.Application Scenarios: 1. Industrial Automation: The DS4301U-200/T&R can be used in industrial automation systems for precise control of analog signals, such as motor control, process control, or instrumentation. 2. Test and Measurement Equipment: It can be used in test and measurement equipment where accurate analog voltage generation is required, such as waveform generators, signal generators, or calibration equipment. 3. Audio Equipment: The high precision and low power consumption of this chip make it suitable for audio applications, such as digital audio players, audio mixers, or audio amplifiers. 4. Communication Systems: It can be used in communication systems for generating analog signals, such as in radio frequency (RF) transmitters or receivers, base stations, or software-defined radios.These are just a few examples of the advantages and application scenarios of the DS4301U-200/T&R integrated circuit chip. The actual usage may vary depending on the specific requirements and design considerations of the application.
DS4301U-200/T&R Relevant information