Home / Digital Potentiometers / MCP4232T-502E/MF/
MCP4232T-502E/MF

MCP4232T-502E/MF

Manufacturer No:

MCP4232T-502E/MF

Manufacturer:

Microchip Technology

Description:

IC DGTL POT 5KOHM 129TAP 10DFN

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP4232T-502E/MF Specifications

  • Type
    Parameter
  • Resistance - Wiper (Ohms) (Typ)
    75
  • Operating Temperature
    -40°C ~ 125°C
  • Package / Case
    10-VFDFN Exposed Pad
  • Supplier Device Package
    10-DFN (3x3)
  • Mounting Type
    Surface Mount
  • Temperature Coefficient (Typ)
    150ppm/°C
  • Tolerance
    ±20%
  • Features
    -
  • Voltage - Supply
    1.8V ~ 5.5V
  • Memory Type
    Volatile
  • Interface
    SPI
  • Resistance (Ohms)
    5k
  • Number of Taps
    129
  • Number of Circuits
    2
  • Configuration
    Rheostat
  • Taper
    Linear
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP4232T-502E/MF is a dual digital potentiometer integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Dual Potentiometer: The MCP4232T-502E/MF has two independent potentiometers in a single chip, allowing for simultaneous control of two different parameters or circuits. 2. Digital Control: It is a digitally controlled potentiometer, which means it can be easily controlled and adjusted using digital signals from a microcontroller or other digital devices. 3. Non-volatile Memory: The chip has non-volatile memory, which means it can retain its settings even when power is removed. This is useful in applications where the potentiometer settings need to be preserved across power cycles. 4. Low Power Consumption: The MCP4232T-502E/MF is designed to operate with low power consumption, making it suitable for battery-powered devices or applications where power efficiency is important. 5. Wide Resistance Range: It offers a wide resistance range, allowing for precise control over a broad range of values.Application Scenarios: 1. Audio Equipment: The MCP4232T-502E/MF can be used in audio equipment such as mixers, amplifiers, or equalizers to control volume levels, tone adjustments, or balance between channels. 2. Industrial Control Systems: It can be used in industrial control systems to adjust parameters like voltage, current, or resistance in various circuits or sensors. 3. Test and Measurement Instruments: The chip can be utilized in test and measurement instruments to calibrate or adjust parameters like gain, offset, or sensitivity. 4. Lighting Control: It can be employed in lighting control systems to adjust brightness levels or color temperature in LED lighting fixtures. 5. Consumer Electronics: The MCP4232T-502E/MF can be used in various consumer electronic devices like TVs, set-top boxes, or gaming consoles to control audio volume, screen brightness, or other parameters.These are just a few examples of the advantages and application scenarios of the MCP4232T-502E/MF integrated circuit chip. Its versatility and flexibility make it suitable for a wide range of applications where precise and digital control of parameters is required.
MCP4232T-502E/MF Relevant information