Home / Digital Potentiometers / DS1807+/
DS1807+

DS1807+

Manufacturer No:

DS1807+

Description:

IC DGTL POT 45KOHM 65TAP 14DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

DS1807+ Specifications

  • Type
    Parameter
  • Resistance - Wiper (Ohms) (Typ)
    400 (Max)
  • Operating Temperature
    -40°C ~ 85°C
  • Package / Case
    14-DIP (0.300", 7.62mm)
  • Supplier Device Package
    14-PDIP
  • Mounting Type
    Through Hole
  • Temperature Coefficient (Typ)
    750ppm/°C
  • Tolerance
    ±20%
  • Features
    Mute, Selectable Address, Zero-Cross Sense
  • Voltage - Supply
    2.7V ~ 5.5V
  • Memory Type
    Volatile
  • Interface
    I²C
  • Resistance (Ohms)
    45k
  • Number of Taps
    65
  • Number of Circuits
    2
  • Configuration
    Potentiometer
  • Taper
    Logarithmic
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tube
  • Product Status
    Last Time Buy
  • Series
    -
The MCP4802-E/SN is a dual-channel, 8-bit digital-to-analog converter (DAC) integrated circuit chip. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the MCP4802-E/SN are:Advantages: 1. Dual-Channel: The MCP4802-E/SN has two independent DAC channels, allowing for simultaneous conversion of two different digital signals to analog outputs. 2. 8-Bit Resolution: It provides an 8-bit resolution, which means it can convert digital signals into 256 different analog output levels, providing relatively fine-grained control over the analog output. 3. Low Power Consumption: The chip is designed to operate at low power, making it suitable for battery-powered or energy-efficient applications. 4. Small Package Size: The MCP4802-E/SN comes in a small package size, making it suitable for space-constrained applications or designs where size reduction is a priority. 5. SPI Interface: It communicates with the microcontroller or other digital devices using the Serial Peripheral Interface (SPI) protocol, which is a widely used and well-supported communication standard.Application Scenarios: 1. Audio Applications: The MCP4802-E/SN can be used in audio applications where digital audio signals need to be converted into analog signals. It can be used in audio mixers, musical instruments, audio effects processors, or audio amplifiers. 2. Industrial Control Systems: The chip can be used in industrial control systems where digital control signals need to be converted into analog control signals. It can be used in motor control systems, process control systems, or programmable logic controllers (PLCs). 3. Test and Measurement Equipment: The MCP4802-E/SN can be used in test and measurement equipment where digital signals need to be converted into analog signals for signal generation or calibration purposes. 4. Communication Systems: It can be used in communication systems where digital signals need to be converted into analog signals for modulation or demodulation purposes. 5. IoT and Embedded Systems: The chip can be used in Internet of Things (IoT) devices or embedded systems where digital control signals need to be converted into analog signals for various applications such as sensor interfacing, actuator control, or signal conditioning.These are just a few examples of the advantages and application scenarios of the MCP4802-E/SN integrated circuit chip. The versatility and features of the chip make it suitable for a wide range of applications requiring digital-to-analog conversion.
DS1807+ Relevant information