Home / Digital Potentiometers / MCP4232-103E/UN/
MCP4232-103E/UN

MCP4232-103E/UN

Manufacturer No:

MCP4232-103E/UN

Manufacturer:

Microchip Technology

Description:

IC DGTL POT 10KOHM 129TAP 10MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP4232-103E/UN Specifications

  • Type
    Parameter
  • Resistance - Wiper (Ohms) (Typ)
    75
  • Operating Temperature
    -40°C ~ 125°C
  • Package / Case
    10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
  • Supplier Device Package
    10-MSOP
  • Mounting Type
    Surface Mount
  • Temperature Coefficient (Typ)
    150ppm/°C
  • Tolerance
    ±20%
  • Features
    -
  • Voltage - Supply
    1.8V ~ 5.5V
  • Memory Type
    Volatile
  • Interface
    SPI
  • Resistance (Ohms)
    10k
  • Number of Taps
    129
  • Number of Circuits
    2
  • Configuration
    Rheostat
  • Taper
    Linear
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP4232-103E/UN is a dual digital potentiometer integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Dual Potentiometer: The MCP4232-103E/UN has two independent potentiometers in a single chip, allowing for simultaneous control of two different parameters or circuits. 2. Digital Control: It is a digitally controlled potentiometer, which means it can be easily interfaced with microcontrollers or other digital devices for precise and automated control. 3. Non-volatile Memory: The chip has non-volatile memory, which means it can retain its settings even when power is removed. This is useful in applications where the potentiometer settings need to be preserved across power cycles. 4. Low Power Consumption: The MCP4232-103E/UN is designed to operate with low power consumption, making it suitable for battery-powered devices or applications where power efficiency is crucial. 5. Wide Resistance Range: It offers a wide resistance range, allowing for flexibility in different applications.Application Scenarios: 1. Audio Equipment: The MCP4232-103E/UN can be used in audio equipment such as mixers, amplifiers, or equalizers to control volume levels, tone adjustments, or balance between channels. 2. Industrial Control: It can be applied in industrial control systems to adjust parameters like motor speed, temperature control, or light intensity. 3. Test and Measurement: The chip can be used in test and measurement equipment to calibrate or adjust signal levels, gain, or offset. 4. Consumer Electronics: It can be utilized in consumer electronics devices like TVs, set-top boxes, or gaming consoles to control various parameters or settings. 5. Instrumentation: The MCP4232-103E/UN can be employed in instrumentation devices like oscilloscopes, signal generators, or data loggers to adjust signal levels or calibration.These are just a few examples of the advantages and application scenarios of the MCP4232-103E/UN integrated circuit chip. Its versatility and digital control capabilities make it suitable for a wide range of applications where precise and automated control of parameters is required.
MCP4232-103E/UN Relevant information