Home / Analog to Digital Converters (ADC) / ADC1412D080HN-C18/
ADC1412D080HN-C18

ADC1412D080HN-C18

Manufacturer No:

ADC1412D080HN-C18

Description:

IC ADC 14BIT PIPELINED 64HVQFN

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

ADC1412D080HN-C18 Specifications

  • Type
    Parameter
  • Mounting Type
    Surface Mount
  • Supplier Device Package
    64-VFQFPN (9x9)
  • Package / Case
    64-VFQFN Exposed Pad
  • Operating Temperature
    -40°C ~ 85°C
  • Features
    Simultaneous Sampling
  • Voltage - Supply, Digital
    2.85V ~ 3.4V
  • Voltage - Supply, Analog
    2.85V ~ 3.4V
  • Reference Type
    External, Internal
  • Architecture
    Pipelined
  • Number of A/D Converters
    2
  • Ratio - S/H:ADC
    1:1
  • Configuration
    S/H-ADC
  • Data Interface
    LVDS - Parallel, Parallel
  • Input Type
    Differential, Single Ended
  • Number of Inputs
    2
  • Sampling Rate (Per Second)
    80M
  • Number of Bits
    14
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    -
The DAC702KH-2 is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is a digital-to-analog converter (DAC) chip with specific features and specifications. Here are some advantages and application scenarios of the DAC702KH-2:Advantages: 1. High Precision: The DAC702KH-2 offers high precision and accuracy in converting digital signals to analog voltages. It has a resolution of 16 bits, allowing for fine-grained control over the output voltage levels. 2. Low Power Consumption: This IC chip is designed to operate with low power consumption, making it suitable for battery-powered devices or applications where power efficiency is crucial. 3. Small Form Factor: The DAC702KH-2 comes in a compact package, making it suitable for space-constrained designs or applications where size is a critical factor. 4. Wide Operating Range: It has a wide operating voltage range, typically from 2.7V to 5.5V, allowing it to be used in various voltage supply scenarios. 5. Easy Integration: The DAC702KH-2 is designed for easy integration into existing electronic systems. It supports standard digital interfaces like I2C and SPI, simplifying the communication and control aspects.Application Scenarios: 1. Industrial Automation: The DAC702KH-2 can be used in industrial automation systems where precise analog control signals are required. It can convert digital control signals from a microcontroller or PLC into analog voltages to drive actuators, valves, or other analog devices. 2. Audio Equipment: The high precision and low noise characteristics of the DAC702KH-2 make it suitable for audio applications. It can be used in audio amplifiers, digital audio players, or audio mixing consoles to convert digital audio signals into analog audio outputs. 3. Test and Measurement Instruments: The DAC702KH-2 can be used in various test and measurement instruments where accurate analog voltage generation is necessary. It can be used in signal generators, data acquisition systems, or calibration equipment. 4. Medical Devices: The high precision and low power consumption of the DAC702KH-2 make it suitable for medical devices that require accurate analog control signals. It can be used in devices like patient monitors, infusion pumps, or laboratory equipment. 5. Automotive Electronics: The DAC702KH-2 can find applications in automotive electronics, such as in-car audio systems, climate control systems, or sensor calibration circuits.It's important to note that the specific application scenarios may vary depending on the requirements and specifications of the overall system design.
ADC1412D080HN-C18 Relevant information