Home / Voltage Reference / LT1004CLPE3-2-5/
LT1004CLPE3-2-5

LT1004CLPE3-2-5

Manufacturer No:

LT1004CLPE3-2-5

Manufacturer:

Texas Instruments

Description:

VOLTAGE REFERENCE

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LT1004CLPE3-2-5 Specifications

  • Type
    Parameter
  • Voltage - Output (Max)
    -
  • Supplier Device Package
    TO-92-3
  • Package / Case
    TO-226-3, TO-92-3 (TO-226AA)
  • Mounting Type
    Through Hole
  • Operating Temperature
    0°C ~ 70°C (TA)
  • Current - Cathode
    20 µA
  • Current - Supply
    -
  • Voltage - Input
    -
  • Noise - 10Hz to 10kHz
    120µVrms
  • Noise - 0.1Hz to 10Hz
    -
  • Temperature Coefficient
    20ppm/°C Typical
  • Tolerance
    ±0.8%
  • Current - Output
    20 mA
  • Voltage - Output (Min/Fixed)
    2.5V
  • Output Type
    Fixed
  • Reference Type
    Shunt
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    -
The LT1004CLPE3-2-5 is a precision voltage reference integrated circuit chip manufactured by Linear Technology (now part of Analog Devices). It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the LT1004CLPE3-2-5 are:Advantages: 1. High Precision: The LT1004CLPE3-2-5 provides a highly accurate and stable output voltage reference with a typical initial accuracy of ±0.8mV and a temperature coefficient of ±10ppm/°C. 2. Low Noise: It has low output noise, making it suitable for applications that require precise and low-noise voltage references. 3. Low Dropout Voltage: The LT1004CLPE3-2-5 has a low dropout voltage, which means it can operate with a small voltage difference between the input and output, making it suitable for low-power applications. 4. Wide Temperature Range: It operates over a wide temperature range of -40°C to 125°C, making it suitable for various environmental conditions. 5. Low Quiescent Current: It has a low quiescent current of 80μA, making it suitable for battery-powered applications.Application Scenarios: 1. Precision Instrumentation: The LT1004CLPE3-2-5 can be used as a voltage reference in precision instrumentation applications such as digital multimeters, oscilloscopes, and data acquisition systems, where accurate and stable voltage references are required. 2. Analog-to-Digital Converters (ADCs): It can be used as a reference voltage for ADCs to ensure accurate and consistent conversion of analog signals into digital data. 3. Voltage Regulators: The LT1004CLPE3-2-5 can be used as a stable reference voltage for voltage regulators, ensuring a precise and stable output voltage. 4. Sensor Calibration: It can be used in sensor calibration applications where a precise and stable reference voltage is required to calibrate the sensor outputs. 5. Portable and Battery-Powered Devices: Due to its low dropout voltage and low quiescent current, the LT1004CLPE3-2-5 is suitable for portable and battery-powered devices such as handheld meters, portable medical devices, and wireless sensors.These are just a few examples of the advantages and application scenarios of the LT1004CLPE3-2-5. The chip's high precision, low noise, wide temperature range, and low power consumption make it suitable for various applications where accurate and stable voltage references are required.
LT1004CLPE3-2-5 Relevant information