Home / Voltage Reference / LT1004CPW-1-2/
LT1004CPW-1-2

LT1004CPW-1-2

Manufacturer No:

LT1004CPW-1-2

Manufacturer:

Texas Instruments

Description:

IC VREF SHUNT 0.32% 8TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LT1004CPW-1-2 Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-TSSOP
  • Package / Case
    8-TSSOP (0.173", 4.40mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C (TA)
  • Current - Cathode
    10 µA
  • Current - Supply
    -
  • Voltage - Input
    -
  • Noise - 10Hz to 10kHz
    60µVrms
  • Noise - 0.1Hz to 10Hz
    -
  • Temperature Coefficient
    20ppm/°C Typical
  • Tolerance
    ±0.32%
  • Current - Output
    20 mA
  • Voltage - Output (Max)
    -
  • Voltage - Output (Min/Fixed)
    1.235V
  • Output Type
    Fixed
  • Reference Type
    Shunt
  • Packaging
    Tray
  • Product Status
    Active
  • Series
    -
The LT1004CPW-1-2 is a precision voltage reference integrated circuit chip manufactured by Linear Technology (now part of Analog Devices). It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the LT1004CPW-1-2 are:Advantages: 1. High Precision: The LT1004CPW-1-2 provides a highly accurate and stable output voltage reference with a typical initial accuracy of ±0.8mV and a temperature coefficient of ±10ppm/°C. 2. Low Noise: It has low output noise, making it suitable for applications that require precise and low-noise voltage references. 3. Low Dropout Voltage: The LT1004CPW-1-2 has a low dropout voltage, which means it can operate with a small voltage difference between the input and output, making it suitable for low-power applications. 4. Wide Temperature Range: It operates over a wide temperature range of -40°C to 125°C, making it suitable for various environmental conditions. 5. Low Quiescent Current: It has a low quiescent current consumption, making it suitable for battery-powered applications.Application Scenarios: 1. Precision Instrumentation: The LT1004CPW-1-2 can be used as a stable voltage reference in precision instrumentation applications such as digital multimeters, oscilloscopes, and data acquisition systems. 2. Analog-to-Digital Converters (ADCs): It can be used as a reference voltage for ADCs to ensure accurate and consistent conversion of analog signals into digital data. 3. Voltage Regulators: The LT1004CPW-1-2 can be used as a reference voltage for voltage regulators, ensuring stable and precise output voltages. 4. Sensor Calibration: It can be used in sensor calibration circuits where a stable and accurate reference voltage is required for calibration purposes. 5. Portable and Battery-Powered Devices: Due to its low power consumption and low dropout voltage, the LT1004CPW-1-2 is suitable for portable and battery-powered devices such as handheld meters, portable medical devices, and wireless sensors.These are just a few examples of the advantages and application scenarios of the LT1004CPW-1-2. The specific usage depends on the requirements of the circuit and the desired precision and stability of the voltage reference.
LT1004CPW-1-2 Relevant information