Home / Voltage Regulators - Linear + Switching / MAX8513EEI+T/
MAX8513EEI+T

MAX8513EEI+T

Manufacturer No:

MAX8513EEI+T

Description:

IC REG TRIPLE BUCK/LINEAR 28QSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MAX8513EEI+T Specifications

  • Type
    Parameter
  • Supplier Device Package
    28-QSOP
  • Package / Case
    28-SSOP (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C
  • Voltage - Supply
    4.5V ~ 28V
  • w/Sequencer
    No
  • w/Supervisor
    No
  • w/LED Driver
    No
  • Voltage/Current - Output 3
    Controller
  • Voltage/Current - Output 2
    Controller
  • Voltage/Current - Output 1
    Controller
  • Frequency - Switching
    250kHz ~ 1.5MHz
  • Number of Outputs
    3
  • Topology
    Step-Down (Buck) (1), Linear (LDO) (2)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    -
The MAX8513EEI+T is a specific integrated circuit (IC) chip manufactured by Maxim Integrated. It is a high-side, current-sense amplifier with an integrated comparator and voltage reference. Here are some advantages and application scenarios of the MAX8513EEI+T IC chip:Advantages: 1. High-Side Current Sensing: The MAX8513EEI+T is designed for high-side current sensing applications, where it can accurately measure the current flowing through a load by sensing the voltage drop across a sense resistor.2. Integrated Comparator: The IC chip includes an integrated comparator, which allows it to compare the sensed current with a reference voltage and generate a digital output signal based on the comparison result.3. Voltage Reference: The MAX8513EEI+T also incorporates an integrated voltage reference, which provides a stable and accurate reference voltage for the comparator and other circuitry.4. Wide Input Voltage Range: The IC chip can operate with a wide input voltage range, typically from 4.5V to 76V, making it suitable for various applications.5. Low Quiescent Current: The MAX8513EEI+T has a low quiescent current, which helps in minimizing power consumption and increasing efficiency.Application Scenarios: 1. Power Management: The MAX8513EEI+T can be used in power management systems to monitor and control the current flowing through different loads, such as motors, heaters, or LED arrays. It enables precise current measurement and protection against overcurrent conditions.2. Battery Management: In battery-powered systems, the IC chip can be employed to monitor the current drawn from the battery, allowing for accurate battery capacity estimation and protection against excessive discharge.3. Automotive Applications: The MAX8513EEI+T is suitable for automotive applications, such as electric vehicles or hybrid vehicles, where it can be used for current sensing in motor control systems, battery management, or power distribution.4. Industrial Control Systems: The IC chip can be utilized in industrial control systems to monitor and control the current in various equipment, such as pumps, motors, or solenoids. It enables precise current measurement and protection against abnormal current conditions.5. Lighting Systems: The MAX8513EEI+T can be employed in lighting systems, such as LED drivers, to monitor and control the current flowing through the LEDs. It helps in achieving consistent brightness, efficient power management, and protection against overcurrent.These are just a few examples of the advantages and application scenarios of the MAX8513EEI+T IC chip. The specific usage depends on the requirements of the system and the designer's implementation.
MAX8513EEI+T Relevant information