Home / Voltage Regulators - DC DC Switching Regulators / XC9262A2KD1R-G/
XC9262A2KD1R-G

XC9262A2KD1R-G

Manufacturer No:

XC9262A2KD1R-G

Manufacturer:

Torex Semiconductor Ltd

Description:

ULTRA SMALL 1.5A COT CONTROL SYN

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

XC9262A2KD1R-G Specifications

  • Type
    Parameter
  • Supplier Device Package
    LGA-8B01
  • Package / Case
    8-XFLGA
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 105°C (TA)
  • Synchronous Rectifier
    Yes
  • Frequency - Switching
    3MHz
  • Current - Output
    1.5A
  • Voltage - Output (Max)
    -
  • Voltage - Output (Min/Fixed)
    2.75V
  • Voltage - Input (Max)
    5.5V
  • Voltage - Input (Min)
    2.7V
  • Number of Outputs
    1
  • Output Type
    Fixed
  • Topology
    Buck
  • Output Configuration
    Positive
  • Function
    Step-Down
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    XC9262
The XC9262A2KD1R-G is a specific model of integrated circuit (IC) chip manufactured by Torex Semiconductor. It is a voltage regulator IC with a wide input voltage range and low dropout voltage. Here are some advantages and application scenarios of the XC9262A2KD1R-G:Advantages: 1. Wide input voltage range: The XC9262A2KD1R-G can accept input voltages ranging from 2.5V to 20V, making it suitable for a variety of power supply applications. 2. Low dropout voltage: The dropout voltage is the minimum voltage difference required between the input and output for the regulator to function properly. The XC9262A2KD1R-G has a low dropout voltage of 0.3V at a maximum output current of 300mA, which helps to minimize power loss and improve efficiency. 3. Low quiescent current: Quiescent current is the current consumed by the regulator when it is in standby or idle mode. The XC9262A2KD1R-G has a low quiescent current of 30?A, which is beneficial for battery-powered applications, as it helps to extend battery life.Application scenarios: 1. Battery-powered devices: The low dropout voltage and low quiescent current of the XC9262A2KD1R-G make it suitable for use in battery-powered devices such as portable electronics, IoT devices, and wearable devices. It helps to efficiently regulate the battery voltage and prolong the battery life. 2. Industrial applications: The wide input voltage range of the XC9262A2KD1R-G makes it suitable for industrial applications where the input voltage may vary widely. It can be used in various industrial control systems, sensors, and actuators. 3. Automotive electronics: The XC9262A2KD1R-G is also suitable for automotive applications where the input voltage can fluctuate due to the vehicle's electrical system. It can be used in automotive electronics such as infotainment systems, lighting controls, and power management modules.It is important to note that the specific advantages and application scenarios may vary depending on the requirements and specifications of the target system. It is recommended to refer to the datasheet and consult with the manufacturer for detailed information and guidance on using the XC9262A2KD1R-G IC chip.
XC9262A2KD1R-G Relevant information