Home / Instrumentation, OP Amps, Buffer Amps / MCP6074T-E/ST/
MCP6074T-E/ST

MCP6074T-E/ST

Manufacturer No:

MCP6074T-E/ST

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 4 CIRCUIT 14TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6074T-E/ST Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Gain Bandwidth Product
    1.2 MHz
  • Supplier Device Package
    14-TSSOP
  • Package / Case
    14-TSSOP (0.173", 4.40mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    1.8 V
  • Current - Output / Channel
    28 mA
  • Current - Supply
    110µA (x4 Channels)
  • Voltage - Input Offset
    150 µV
  • Current - Input Bias
    1 pA
  • Slew Rate
    0.5V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    4
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP6074T-E/ST is a quad operational amplifier (Op-Amp) integrated circuit (IC) chip. It has several advantages and can be used in various application scenarios:Advantages: 1. Low Power Consumption: The MCP6074T-E/ST is designed to operate with very low power consumption, which makes it suitable for battery-powered applications or energy-efficient systems. 2. Rail-to-Rail Output: It provides rail-to-rail output swing, allowing for maximum utilization of the available supply voltage range. This feature is useful in applications where the output signal needs to be close to the supply rail voltages. 3. Low Input Offset Voltage: The IC chip has a low input offset voltage, resulting in accurate and precise measurement or signal amplification. It is often desirable in applications that require high accuracy. 4. Low Input Bias Currents: It exhibits low input bias currents, reducing the error introduced by the input bias current. This advantage makes it suitable for applications that demand high input impedance or where low signal sources are involved. 5. Temperature Stability: The MCP6074T-E/ST offers good temperature stability, ensuring consistent performance across a wide temperature range. This feature is crucial in applications where the operating conditions can vary significantly.Application Scenarios: 1. Sensor Signal Conditioning: The MCP6074T-E/ST can be used to amplify and condition signals from sensors like temperature sensors, pressure sensors, or light sensors. Its low power consumption and precise amplification capabilities make it suitable for this application. 2. Battery Management: It can be employed in battery management systems to monitor the battery voltage levels with high accuracy and minimal power consumption. 3. Audio Amplification: The IC chip can be used in audio amplifiers, headphone amplifiers, or audio recording systems where low distortion and accurate amplification of audio signals are required. 4. Instrumentation and Measurement Systems: The MCP6074T-E/ST is well-suited for instrumentation and measurement applications that require precise signal amplification and low error rates. 5. Automotive Electronics: Due to its low power consumption and temperature stability, it can be used in various automotive electronic systems like automotive sensor interfaces or control systems.Overall, the MCP6074T-E/ST IC chip offers low power consumption, precise amplification, and temperature stability, making it suitable for a wide range of applications in various industries.
MCP6074T-E/ST Relevant information