Home / Digital Potentiometers / AD5293BRUZ-100-RL7/
AD5293BRUZ-100-RL7

AD5293BRUZ-100-RL7

Manufacturer No:

AD5293BRUZ-100-RL7

Manufacturer:

Analog Devices Inc.

Description:

IC DGTL POT 100KOHM 14TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

AD5293BRUZ-100-RL7 Specifications

  • Type
    Parameter
  • Resistance - Wiper (Ohms) (Typ)
    60
  • Operating Temperature
    -40°C ~ 105°C
  • Package / Case
    14-TSSOP (0.173", 4.40mm Width)
  • Supplier Device Package
    14-TSSOP
  • Mounting Type
    Surface Mount
  • Temperature Coefficient (Typ)
    35ppm/°C
  • Tolerance
    ±1%
  • Features
    Cascade Pin
  • Voltage - Supply
    9V ~ 33V, ±9V ~ 16.5V
  • Memory Type
    Volatile
  • Interface
    SPI
  • Resistance (Ohms)
    100k
  • Number of Taps
    1024
  • Number of Circuits
    1
  • Configuration
    Potentiometer
  • Taper
    Linear
  • DigiKey Programmable
    Not Verified
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The AD5293BRUZ-100-RL7 is a digital potentiometer integrated circuit chip manufactured by Analog Devices. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the AD5293BRUZ-100-RL7 are:Advantages: 1. Digital Control: The AD5293BRUZ-100-RL7 is a digital potentiometer, which means it can be controlled digitally using a microcontroller or other digital devices. This allows for precise and accurate control of resistance values.2. Programmable Resistance: The chip provides a programmable resistance range of 100Ω, allowing for flexibility in adjusting resistance values as per the application requirements.3. Non-Volatile Memory: The AD5293BRUZ-100-RL7 has non-volatile memory, which means it retains the programmed resistance values even when power is removed. This feature is useful in applications where the resistance settings need to be stored and recalled after power cycles.4. Low Power Consumption: The chip is designed to operate with low power consumption, making it suitable for battery-powered applications or devices where power efficiency is crucial.Application Scenarios: 1. Audio Equipment: The AD5293BRUZ-100-RL7 can be used in audio equipment, such as amplifiers or mixers, to control volume levels or tone adjustments digitally. Its programmable resistance range and accurate control make it suitable for audio applications.2. Industrial Control Systems: The chip can be utilized in industrial control systems where precise resistance adjustments are required. It can be used to control variables like motor speed, temperature, or voltage levels in a digitally controlled manner.3. Test and Measurement Instruments: The AD5293BRUZ-100-RL7 can be employed in test and measurement instruments, such as signal generators or oscilloscopes, to calibrate or adjust signal levels or other parameters digitally.4. Communication Systems: The chip can find applications in communication systems, such as radio transceivers or wireless modules, where it can be used to control signal gain or impedance matching digitally.5. Consumer Electronics: The AD5293BRUZ-100-RL7 can be integrated into various consumer electronic devices, including TVs, gaming consoles, or smart home appliances, to provide digital control over various parameters like brightness, contrast, or audio levels.These are just a few examples of the advantages and application scenarios of the AD5293BRUZ-100-RL7. The chip's flexibility, accuracy, and digital control capabilities make it suitable for a wide range of applications where precise resistance adjustments are required.
AD5293BRUZ-100-RL7 Relevant information